Milling equipment

The Blastrac 350E steel shot blaster is perfect for small and medium-sized jobs. Its modular construction allows for it to be easily disassembled and reassembled through a space of 600mm. For larger jobs, be sure to visit the Blastrac 500E Global.

	Closed circuit operation is dust free, when connected to an appropriate Blastrac dust collector.
	Electrical drive system with special gear can also be used for tank sloping roof cleaning.
	Independent drive for each rear wheel.
	Increased productivity, reduced maintenance costs.
	Fast and efficient removal of coatings, rust and mill scale.
	Special electrical safety device, to be able to use the machine for storage tank blast-cleaning.
	Ergonomic design and user friendly control panel.

Applications

The 350E steel blast-cleaning machine is especially designed to be used on internal tank bottoms or tank roofs and can equally be used on ship decks, steel plates, oil platform helicopter decks and walkways, bridge decks, navy ship decks and steel floors. With its modular assembly it can easily be put into storage tanks for cleaning internal surfaces. To receive advice or training about steel blasting or to find the best products for your surface preparation applications, contact Blastrac.

Technical Specifications 350E

Name	Description
Working width	350 mm
Blast wheel power	11kW
Drive system / speed	Electric / 1 – 15 m/min
Weight	430 kg
Output motor	3 x 400V / 50Hz or 60Hz
Electrical CEE plug	32 Amp / Three phase – 5 pole
Dimensions L / W / H	1350 mm / 650mm / 1100mm
Working direction	Forward (push)
Abrasive consumption	0,2 – 0,5 kg/m²
Application	Steel

Options / Accessories 350E

Name	Description
Dustcollector	BDC-655
Abrasive S390 / S460 / SG16 / SG25	999-0390 / 999-0460 / 999-0016 / 999-0025
Suction hose Ø127 (minimum 15m)	492019
Maintenance kit	On request
Personal safety features	On request

The Blastrac 350S steel blast cleaning machine is ideal for the use on horizontal steel surfaces. It is specially designed to be able to process the stepped steel sheets relief on floor make up. To find the perfect solution for your steel surface preparation applications, be sure to visit our full range of Steel Blasters.

	Closed circuit operation is dust free, when connected to an appropriate Blastrac dust collector.
	Hydraulic drive system.
	Independent drive for each rear wheel.
	Increased productivity, reduced maintenance costs.
	Fast and efficient removal of coatings, rust and mill scale on steel and concrete surfaces.
	Ergonomic design and user friendly control panel.
	Available in either 50 Hz or 60 Hz

Applications

The 350S is perfect for the preparation of horizontal steel surfaces include the removal of coatings, rust, mill scale and much more. The 350S is especially designed to be used helicopter decks and walkways, bridge decks, navy ship decks and steel floors. With its modular assembly it can easily be put into storage tanks for cleaning internal surfaces. To receive advice or training about steel blasting or to find the best products for your surface preparation applications, contact Blastrac.

Technical Specifications 350S

Name	Description
Working width	350 mm
Blasting capacity	Up to 38m²/h on steel Up to 300m²/h on concrete
Blast wheel power	11kW
Drive system / speed	Hydraulic / 1 - 30 m/min
Weight	415 kg
Output motor	3 x 400V / 50Hz or 60Hz
Electrical CEE plug	32 Amp / Three phase – 5 pole
Dimensions (L,W,H)	1350 mm / 650mm / 1100mm
Drive system / speed	Manual / N/A
Working direction	Forward (push)
Abrasive consumption	0,2 – 0,5 kg/m²
Application	Steel / Concrete

Options / Accessories 350S

Name	Description
Dustcollector	BDC-655
Abrasive S390 / S460 / SG16 / SG25	999-0390 / 999-0460 / 999-0016 / 999-0025
Suction hose Ø127 (minimum 15m)	492019
Magnetic broom R600 (only on concrete)	001238
Maintenance kit	On request
Personal safety features	On request

Similar to the 350E, the Blastrac 500E Global steel blast cleaning machine has an easily assembled modular construction to allow it to pass through narrow openings and hard to reach places for steel cleaning. With a great production width, the 500E boasts a higher productivity rate for larger jobs.

	Closed circuit operation is dust free, when connected to an appropriate Blastrac dust collector.
	Modular construction: allows the machine to be disassembled into only a few parts to pass through a Ø 600mm storage tank access hatch.
	Electrical drive system with special gear can also be used for tank sloping roof cleaning.
	Independent drive for each rear wheel.
	Increased productivity, reduced maintenance costs.
	Fast and efficient removal of coatings, rust and mill scale.
	Special electrical safety device, to be able to use the machine for storage tank blasting.
	Ergonomic design and user friendly control panel.

Applications

The Blastrac 500E steel is ideal for medium and large applications such as, internal tank bottoms, and external tank roofs, ship decks, steel plates, platforms, helicopter decks and walkways, bridge decks, navy ship decks and steel floors. To receive advice or training about steel blasting or to find the best products for your surface preparation applications, contact Blastrac.

Technical Specifications 500E

Name	Description
Working width	500 mm
Blasting capacity	Up to 55m²/h on steel
Blast wheel power	18,5kW or 26,4kW
Drive system / hoisting speed	Electric / 1 - 15 m/min
Weight	750 kg
Output motor	3 x 400V / 60Hz standard (also available in 50Hz)
Electrical CEE plug	63 Amp / Three phase – 5 pole
Dimensions (L,W,H)	1560 mm / 750mm / 1650mm
Working direction	Forward (push)
Abrasive consumption	0,2 – 0,5 kg/m²
Application	Steel

Options / Accessories 500E

Name	Description
Dustcollector	BDC-655 / BDC-854
Abrasive S390 / S460 / SG16 / SG25	999-0390 / 999-0460 / 999-0016 / 999-0025
Suction hose Ø150 (minimum 20m)	00112
Cable coil	E00573
Maintenance kit	On request
Personal safety features	On request

Similar to the 350S, the Blastrac 500S steel blast cleaning machine is ideally suited for medium and large sized steel cleaning jobs and applications. With its larger production width pattern and increased productivity, the 500S will reduce time on the job and maintenance costs.

Closed circuit operation is dust free, when connected to an appropriate Blastrac dust collector.

Hydraulic drive system.

Independent drive for each rear wheel.

Increased productivity, reduced maintenance costs.

Fast and efficient removal of coatings, rust and mill scale on steel and concrete surfaces.

Ergonomic design and user friendly control panel.

Applications

The Blastrac 500S steel blast cleaning machine is an ideal machine for medium and large applications for horizontal steel cleaning. It will quickly remove coatings, rust, mill scale, and more. The Blastrac 500S is especially designed to be used on ship decks, steel plates, platforms, oil platform helicopter decks and walkways, bridge decks, navy ship decks and steel floors. To receive advice or training about steel blasting or to find the best products for your surface preparation applications, contact Blastrac.

Technical Specifications 500S

Name	Description
Working width	500mm
Blasting capacity	Up to 60 m²/h on steel Up to 400 m²/h on concrete
Blast wheel power	18,5kW
Drive system / speed	Hydraulic / 1 – 30 m/min
Weight	650 kg
Output motor	3 x 400V / 60Hz standard (also available in 50Hz)
Electrical CEE plug	63 Amp / Three phase – 5 pole
Working direction	Forward (push)
Abrasive consumption	0,2 – 0,5 kg/m²
Application	Steel / concrete

Options / Accessories 500S

Name	Description
Dustcollector	BDC-655 / BDC-854
Abrasive S390 / S460 / SG16 / SG25	999-0390 / 999-0460 / 999-0016 / 999-0025
Suction hose Ø150 ( minimum 20m)	001112
Magnetic broom R600 (only on concrete)	001238
Maintenance kit	On request
Personal safety features	On request

The Blastrac 600S is a heavy-duty steel blast cleaning machine machine. The high work rate, proven durability, and operator comfort make the 600S ideal for large jobs.

	Closed circuit operation is dust free, when connected to an appropriate Blastrac dust collector.
	Hydraulic drive system.
	Independent drive for each rear wheel.
	Increased productivity, reduced maintenance costs.
	The best performer for removal of thick-layers of non-skid and epoxy coatings.
	Fast and efficient removal of coatings, rust and mill scale.
	Ergonomic design and user friendly control panel.

Applications

The Blastrac 600S steel blast cleaning machine is perfect for the use in the petrochemical industry and in shipyards. The Blastrac 600S is especially designed to be used on ship decks, steel plates, platforms, oil platform helicopter decks and walkways, bridge decks, navy aircraft carrier decks, ship decks and steel floors. To receive advice or training about steel blasting or to find the best products for your surface preparation applications, contact Blastrac.

Technical Specifications 600S

Name	Description
Working width	600 mm
Blasting capacity	Up to 125m²/h on steel
Blast wheel power	35kW
Drive system / speed	Hydraulic / 1 - 30 m/min
Weight	1050 kg
Output motor	3 x 400V / 60Hz standard
Electrical CEE plug	63 Amp / Three phase – 5 pole
Dimensions (L,W,H)	1900 mm / 800mm / 1820mm
Working direction	Forward (push)
Abrasive consumption	0,2 – 0,5 kg/m²
Application	Steel

Options / Accessories 600S

Name	Description
Dustcollector	BDC-854
Abrasive S460 / SG16 / SG25	999-0460 / 999-0016 / 999-0025
Suction hose Ø150 (minimum 20m)	001112
Maintenance kit	On request
Personal safety features	On request

Fast and effective, the Blastrac 350VH is perfect for all vertical steel blast cleaning applications. It is remote controlled for operator safety, comfort, and productivity. For larger jobs, be sure to see the Blastrac 500VH document.

	Closed circuit operation is dust free, when connected to an appropriate Blastrac dust collector.
	Hydraulic / Electrical hoisting system.
	Increased productivity, reduced maintenance costs.
	Fast and efficient removal of coatings, rust, mill scale.
	Ergonomic design and user friendly remote control panel.

Applications

The Blastrac 350VH is a vertical steel blast cleaning machine, designed to clean vertical surfaces, such as oil / storage / water tank shells, ship hulls and many more. Be sure to visit the Blastrac Rigging & Winch systems available for the 350VH. To receive advice or training about steel cleaning, or to find the best products for your surface preparation applications, contact Blastrac.

Technical Specifications 350VH

Name	Description
Working width	350 mm
Blasting capacity	Up to 40m²/h on steel SA 2,5
Blast wheel power	11kW
Drive system / hoisting speed	Electric / 0,2 - 20 m/min
Weight	600 kg
Output motor	3 x 400V / 50Hz or 60Hz
Electrical CEE plug	32 Amp / Three phase – 5 pole
Dimensions (L,W,H)	900 mm / 1050mm / 1250mm
Abrasive consumption	0,2 – 0,5 kg/m²
Application	Vertical steel

Options / Accessories 350VH

Name	Description
Dustcollector	BDC-655 / BDC-854
Abrasive S390 / S460 / SG16 / SG25	999-0390 / 999-0460 / 999-0016 / 999-0025
Suction hose Ø127 (minimum 30m)	492019
Control standard	Remote control system
Rigging systems	Cone Roof / Dome Roof / Floating Roof
Winch system	Hydraulic / Electric hoisting
Maintenance kit	On request
Personal safety features	On request

Similar to the Blastrac 350VH, the Blastrac 500VH is ideally suited for medium and large-sized vertical steel blast cleaning jobs and applications. It is remote controlled for operator safety, comfort, and productivity. With its increased production width and greater productivity, the Blastrac 500VH is ideal for medium and large-sized jobs.


	Closed circuit operation is dust free, when connected to an appropriate Blastrac dust collector.
	Hydraulic hoisting system.
	Increased productivity, reduced maintenance costs.
	The best vertical performer for thick-layers coating and chlorinated rubber removal.
	Fast and efficient removal of coatings, rust and mill scale.
	Ergonomic design and user friendly remote control panel.

Applications

The Blastrac 500VH is a vertical steel blast cleaning machine, designed to clean vertical surfaces, such as oil / storage / water tank shells, ship hulls, off shore platform hulls and many more. Be sure to visit the Blastrac Hydraulic Hoisting systems available for the Blastrac 500VH. To receive advice or training about steel cleaning, or to find the best products for your surface preparation applications, contact Blastrac.

Technical Specifications 500VH

Name	Description
Working width	500 mm
Blasting capacity	Up to 70m²/h on steel SA 2,5
Blast wheel power	18,5kW
Drive system / speed	Electric / 0,5 - 20 m/min
Weight	1625 kg
Output motor	3 x 400V / 60Hz standard (also available in 50Hz)
Electrical CEE plug	63 Amp / Three phase – 5 pole
Dimensions (L,W,H)	1000 mm / 1550mm / 2000mm
Abrasive consumption	0,5 – 1,0 kg/m²
Application	Vertical steel
Personal safety features	On request

Options / Accessories 500VH

Name	Description
Dustcollector	BDC-854
Abrasive S460 / SG12 / SG16	999-0460 / 999-0012 / 999-0016
500VH hoisting system	Hoisting system
Suction hose Ø150 (minimum 20m)	001112
Maintenance kit	On request