Drilling rigs

Drill rigs

C-450-DII

RATED CAPACITY:

Rated capacity is for 4.5 in. to 6.5 in. (114 mm to 165 mm) using rotary or down-the-hole hammer drilling for depths up to 78 ft. (23.8m).

STANDARD MOUNTING:

Standard mounting for the C-450-DII is a heavy-duty, CAT^® Series 312 Plus 17.7 in. (450 mm) wide Triple Grouser Type with 3 point oscillating suspension and a two speed hydraulically driven tram.

PULLDOWN SYSTEM:

Up to 29,000 lb. (13,154 kg) bit loading capacity with a maximum rated pulldown of24,000 lb. (10,886 kg), 13,250 lb. (6,011 kg) hoist capacity. Maximum hoist rate 332 fpm (104 m/pm). Maximum feed rate 184 fpm (57.5 m/pm). Chains: Single heavy duty roller chains 2 in. (51 mm) pitch. Stroke: 23 ft. (7 m) for 20 ft. (6.1 m) drill pipe. 10 in. ( 254 mm) table opening.

ROTARY HEAD:

0 to 141 rpm at 60,055 lbs-in (6,786 Nm) torque. (Based on 100% efficiency). Equipped with nylon guide shoes.

AIR COMPRESSOR:

750 CFM (21.3 m³/min) @ 125 PSI (8.6 Bar) with an Air Pressure Regulator is standard.Synthetic PAO, ISO 32 compressor oil is provided. Optional—900 CFM (25.5 m³/min) @ 350 PSI (24.1 Bar) with 475 HP (354 kW) Caterpillar C13 ACERT diesel engine.

POWER UNIT:

Caterpillar C13 ACERT diesel engine, rated 440 HP (328 kW) @ 1800 rpm with 250 gallon (946 L) fuel capacity.

MAST:

Heavy duty 10 in. (254 mm) wide flange steel beam mast, total length 33.5 ft. (10.2 m), raised and lowered by one 5.5 in. (140 mm) diameter hydraulic cylinder equipped with safety counterbalance valves. Hydraulic powered mast lock pins are provided as standardequipment.

LEVELING JACKS:

The C-450-DII utilizes three (3) leveling jacks, all 36 in. (914 mm) stroke, with built-in safety checks. All jacks are 5 in. (127 mm) diameter bore.

DRILL PIPE HANDLING:

The standard C-450-DII is equipped with a 3 + 1 hydraulic indexing barrel loader to handle 20 ft. (6.1 m) drill pipe, 3.5 in. (89 mm) to 4.5 in. (114 mm) diameter. Hydraulic breakout and power tong system are standard. Also included is a 2,200 lb. (998 kg) fixed-over-hole winch for pipe handling.

AIR FILTERS:

Individual heavy duty two stage dry type filters with a pre-cleaner for engine and compressor.

NIGHT LIGHTING:

A combinatin of Xenon HID and Halogen flood lights for viewing upper mast, table, power unit and deck are provided.

OPERATOR’S CAB:

Isolated operator’s cab and control station, air conditioning, sound abatement, and cab pressurization are provided as standard.

MISCELLANEOUS ITEMS:

-Combined Safety, Parts, and Operations Manual.

-50 hour Maintenance Kit-includes hydraulic, compressor, and case drain filters.

-Cartridge style grease gun and safety kit are also provided.

APPROXIMATE WEIGHT & DIMENSIONS:

Weight: 49,000 lbs. (22,226 kg)

Width: 8 ft. 3 in. (2.5 m)

Height (mast down): 11 ft. 6 in. (3.5 m)

Height (mast up): 36 ft. 6 in. (11.2 m)

Length (mast down):35 ft.3 in.(10.8 m)

Length (mast up): 28 ft. (8.5m)

OPTIONAL EQUIPMENT:

-Dual speed and torque rotary heads

-Compressor variable volume control

-130 °F (54° C) ambient cooler
-REICHdrill Angle Drill Package for 0 °to 30° angle holes in 5° increments.

-9 gpm (34 L/min) water injection

-3.5 in (88.9 mm) or 4.5 in (114.3 mm) diameter pipe available. (Barrel loader capacity dependent upon pipe diameter - CONTACT FACTORY)

-Drill efficiency indicator

-Engine heater for cold weather starts

-Pipe thread greaser

-Centralized lubrication

-Wiggins “Quick-Fill” Service Center

-Export lift kit

-Special or two-tone Paint

-Additional Xenon HID and Halogen lighting

-Engine and compressor extended warranties

C-550-DII

RATED CAPACITY:

Rated capacity is for 5 in. to 6.75 in. (127 mm to 172 mm) using rotary or down-the-hole hammer drilling for depths up to 148 ft. (45.1m).

STANDARD MOUNTING:

Standard mounting for the C-550-DII is a heavy-duty, CAT^® Series 325L, 23.5 in. (600 mm) wide Triple Grouser Type with 3 point oscillating suspension and a two speed hydraulically driven tram.

PULLDOWN SYSTEM:

Up to 40,000 lb. (18,144 kg) bit loading capacity with a maximum of rated pulldown of 35,000 lb. (15,878 kg), 19,792 lb. (8,977 kg) hoist capacity. Maximum hoist rate 204 fpm (62 m/pm). Maximum feed rate 122 fpm (37 m/pm). REGEN increases feed rate to 194 fpm (59 m/min). Chains: Two heavy duty roller chains 2 in. (51 mm) pitch. Stroke: 34 ft.(10.4 m) for 30 ft. (9.14 m) drill pipe. 10 in. (254 mm) table opening.

ROTARY HEAD:

0 to 141 rpm at 64,345 lbs-in (7,271 Nm) torque. (Based on 100% efficiency). Equipped with nylon guide shoes. Optional speeds and torques available.

AIR COMPRESSOR:

900 CFM (25.5 m³/min) @ 125 PSI (8.6 Bar) with an Air Pressure Regulator is standard.Synthetic PAO, ISO 32 compressor oil is provided. Optional—1070 CFM (30.3m³/min) @ 125 PSI (8.6 Bar) with 630 HP (470 kW) Caterpillar C18 ACERT diesel engine; 900 CFM (25.5 m³/min) @ 350 PSI (24.1 Bar) with 540 HP (403 kW) Caterpillar C15 ACERT diesel engine; 1070 CFM (30.3m³/min) @ 375 PSI (25.8 Bar) with 580 HP (433 kW) Caterpillar C15 ACERT diesel engine; 1150 CFM (32.6 m³/min) @ 375 PSI (25.8 Bar) with 630 HP (470 kW) Caterpillar C18 ACERT diesel engine.

POWER UNIT:

Caterpillar C15 ACERT diesel engine, rated 540 HP (403 kW) @ 1800 rpm with 375 gal.(1,419 L) fuel capacity.

MAST:

Heavy duty structural steel mast with angular stress members and steel plated reinforcement at high stress areas, total length 40 ft. (12.2 m), raised and lowered by two5.5 in (140 mm) diameter hydraulic cylinders equipped with safety counterbalance valves.Hydraulic powered mast lock pins are provided as standard equipment.

LEVELING JACKS:

The C-550-DII utilizes three (3) leveling jacks, all 48 in. (1.2 m) stroke, with built-in safety checks. All jacks are 5 in. (127 mm) diameter bore.

DRILL PIPE HANDLING:

The standard C-550-DII is equipped with a 4 + 1 hydraulic indexing barrel loader to handle30 ft. (9.1 m) drill pipe, 4 in. (102 mm) to 5.5 in. (140 mm) diameter. Hydraulic breakout and power tong system are standard. Also included is a 2,200 lb. (998 kg) fixed-over-hole winch for pipe handling.

AIR FILTERS:

Individual heavy duty two stage dry type filters with a pre-cleaner for engine and compressor.

NIGHT LIGHTING:

A combination of Xenon HID and Halogen flood lights for viewing upper mast, table, power unit, and deck are provided.

OPERATOR’S CAB:

Isolated operator’s cab and control station, air conditioning, sound abatement, and cab pressurization are provided as standard.

MISCELLANEOUS ITEMS:

-Combined Safety, Parts, and Operations Manual.

-50 hour Maintenance Kit-includes hydraulic, compressor, and case drain filters.

-Cartridge style grease gun and safety kit are also provided.

APPROXIMATE WEIGHT & DIMENSIONS:

Weight: 80,000 lbs. (36,288 kg)

Width: 10 ft. (3.1 m)

Height (mast down): 13 ft. (4 m)

Height (mast up): 48 ft. 6 in. (14.8 m)

Length (mast down): 49 ft. (15 m)

Length (mast up): 31 ft. (9.5 m)

OPTIONAL EQUIPMENT:

-Dual speed and torque rotary heads

-Compressor variable volume control

-130 °F (54 °C) ambient cooler

-REICHdrill Angle Drill Package for 0° to 30° angle holes in 5° increments.

-9 gpm (34 L/min) water injection

-NVE dust control system

-Drill efficiency indicator

-Engine heater for cold weather starts

-Pipe thread greaser

-Centralized lubrication

-Wiggins “Quick-Fill” Service Center

-Full and partial walkways

-Export lift kit

-Special or two-tone Paint

-Additional Xenon HID and Halogen lighting

-Engine and compressor extended warranties

C-650-D

RATED CAPACITY:

Rated capacity is for 5.5 in. to 7.88 in. (140 mm to 200 mm) using rotary or down-the-hole hammer drilling for depths up to 150 ft. (45.7 m).

STANDARD MOUNTING:

Standard mounting for the C-650-D is a heavy-duty, CAT^® Series 330EL, 23.5 in. (600 mm) wide Triple Grouser Type with 3 point oscillating suspension and a two speed hydraulically driven tram.

PULLDOWN SYSTEM:

Up to 55,000 lb. (24,948 kg) bit loading capacity with a maximum of rated pulldown of 45,000 lb.(20,412 kg), 33,900 lb. (15,377 kg) hoist capacity. Maximum hoist rate 200 fpm (61 m/pm). Maximum feed rate 127 fpm (39 m/pm). REGEN increases feed rate to 350 fpm (106 m/min).Chains: Two heavy duty roller chains 2 in. (51 mm) pitch. Stroke: 34 ft. (10.4 m) for 30 ft. (9.14 m) drill pipe. 12 in. (305 mm) table opening.

ROTARY HEAD:

Dual motor, 0 to 141 rpm at 114,390 lbs-in (12,925 Nm) torque. (Based on 100% efficiency). Equipped with nylon guide shoes. Optional speeds and torques available.

AIR COMPRESSOR:

900 CFM (25.5 m³/min) @ 125 PSI (8.6 Bar) with an Air Pressure Regulator is standard.Synthetic PAO, ISO 32 compressor oil is provided. Optional—1070 CFM (30.3m³/min) @ 125 PSI (8.6 Bar) with 540 HP (403 kW) Caterpillar C15 ACERT diesel engine; 900 CFM (25.5m³/min) @ 350 PSI (24.1 Bar) with 540 HP (403 kW) Caterpillar C15 ACERT diesel engine; 1070 CFM (30.3m³/min) @ 375 PSI (25.8 Bar) with 580 HP (433 kW) Caterpillar C15 ACERT diesel engine; 1150 CFM (32.6 m³/min) @ 375 PSI (25.8 Bar) with 630 HP (470 kW) Caterpillar C18 ACERT diesel engine; 1360 CFM (38.5 m³/min) @ 375 PSI (25.8 Bar) with 800 HP (597 kW) Caterpillar C27 ACERT diesel engine.

POWER UNIT:

Caterpillar C15 ACERT diesel engine, rated 540 HP (403 kW) @ 1800 rpm with 385 gal.(1,457 L) fuel capacity. Optional 215 gal. (814 L) available for total capacity of 600 gal. (2,271 L).

MAST:

Heavy duty structural steel mast with angular stress members and steel plated reinforcement at high stress areas, total length 40 ft. (12.2 m), raised and lowered by two 5.5 in. (140 mm) diameter hydraulic cylinders equipped with safety counterbalance valves. Hydraulic powered mast lock pins are provided as standard equipment.

LEVELING JACKS:

The C-650-D utilizes three (3) leveling jacks, 2 rear 5 in. (127 mm) bore x 48 in. (1.2 m) stroke,1 front 5.5 in. (140 mm) bore x 48 in. (1.2 m) stroke with built-in safety checks.

DRILL PIPE HANDLING:

The standard C-650-D is equipped with a 4 + 1 hydraulic indexing barrel loader to handle30 ft. (9.1 m) drill pipe, 4.5 in. (114 mm) to 6 in. (147 mm) diameter. Hydraulic breakout and power tong system are standard. Also included is a 2,200 lb. (998 kg) fixed-over-hole winch for pipe handling.

AIR FILTERS:

Individual heavy duty two stage dry type filters with a pre-cleaner for engine and compressor.

NIGHT LIGHTING:

A combination of Xenon HID and Halogen flood lights for viewing upper mast, table, power unit and deck are provided.

OPERATOR’S CAB:

Large isolated angled operator’s cab and control station allows operator to face drill table. Air conditioning, sound abatement, and cab pressurization are provided as standard.

MISCELLANEOUS ITEMS:

-Combined Safety, Parts, and Operations Manual.

-50 hour Maintenance Kit-includes hydraulic, compressor, and case drain filters.

-Cartridge style grease gun and safety kit are also provided.

APPROXIMATE WEIGHT & DIMENSIONS:

Weight: 110,000 lbs. (49,896 kg)

Width: 12 ft. 6 in. (3.8 m)

Height (mast down): 14 ft. 1 in. (4.3 m)

Height (mast up): 46 ft. 6 in. (14.2 m)

Length (mast down): 50 ft.6 in.(15.5 m)

Length (mast up): 34 ft. (10.4 m)

OPTIONAL EQUIPMENT:

-Dual speed & torque rotary heads

-Compressor variable volume control

-130^oF (54^oC) ambient cooler

-REICHdrill Angle Drill Package for 0° to 30° angle holes in 5° increments.

-9 gpm (34 L/min) water injection

-NVE dust control system

-Drill efficiency indicator

-Engine heater for cold weather starts

-Pipe thread greaser

-Centralized lubrication

-Wiggins “Quick-Fill” Service Center

-Full and partial walkways

-Export lift kit

-Special or two-tone Paint

-Additional Xenon HID and Halogen lighting

-Engine and compressor extended warranties

C-700-D

Recommended Hole Size: 6 in. - 9 in. (152 - 229 mm)
Drill Pipe Diameter & Length: 5in.-7 in.(127-178mm) to 35ft. (10.7m)
Bit Loading Capacity: Up to 60,000 lbs. (27,216 kg)
Maximum Rated Pulldown: 50,000 lbs. (22,680 kg)
Approx. Single Pass Depth: 34 ft. 5 in. (10.5 m) with 35 ft. (10.7 m) pipe
Maximum Depth: 174 ft. (53 m)
Rotation & Torque: 0 - 141 RPM @ 114,390 lb-in. (12926 Nm)
Air Compressor & Engine:

STD: 1070 CFM @ 125 PSI @ 1800 RPM (30.3 m³/min @ 8.6 Bar) w/ 540 HP (403 kW) CAT C15 ACERT
OPT: 1300CFM @ 125 PSI @ 1800 RPM (37 m³/min @ 8.6 Bar) w/ 580 HP (433 kW) CAT C15 ACERT
OPT: 1070CFM @ 375 PSI @ 1800 RPM (30.3 m³/min @ 25.8 Bar) w/ 580 HP (433 kW) CAT C15 ACERT
OPT: 1150CFM @ 375 PSI @ 1800 RPM (32.6 m³/min @ 25.8 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT: 1360CFM @ 375 PSI @ 1800 RPM (38.5 m³/min @ 25.8 Bar) w/ 800 HP (597 kW) CAT C27 ACERT

Approx. Operating Weight: 120,000 lbs. (54432 kg)

RATED CAPACITY:

Rated capacity is for 6 in. to 9 in. (152 mm to 229 mm) using rotary or down-the-hole hammer drilling for depths up to 174 ft. (53 m).

STANDARD MOUNTING:

Standard mounting for the C-700-D is a heavy-duty, CAT^® Series 330EL, 23.5 in. (600 mm) wide Triple Grouser Type with 3 point oscillating suspension and a two speed hydraulically driven tram.

PULLDOWN SYSTEM:

Up to 60,000 lb. (27,216 kg) bit loading capacity with a maximum of rated pulldown of 50,000 lb. (22,680 kg), 30,000 lb. (13,608 kg) hoist capacity. Maximum hoist rate 250fpm (76 m/pm). Maximum feed rate 127 fpm (39 m/pm). REGEN increases feed rate to 260 fpm (79 m/min). Chains: Two heavy duty roller chains 2 in. (51 mm) pitch. Stroke:34 ft. (10.4 m) for 30 ft. (9.14 m) drill pipe. 12 in. (305 mm) table opening.

ROTARY HEAD:

Dual motor, 0 to 141 rpm at 114,390 lbs-in (12,926 Nm) torque. (Based on 100% efficiency). Equipped with nylon guide shoes. Optional speeds and torques available.

AIR COMPRESSOR:

1070 CFM (30.3 m³/min) @ 125 PSI (8.6 Bar) with an Air Pressure Regulator is standard.Synthetic PAO, ISO 32 compressor oil is provided. Optional—1300 CFM (37 m³/min) @ 125 PSI (8.6 Bar) with 580 HP (433 kW) Caterpillar C15 ACERT diesel engine; 1070 CFM (30.3m³/min) @ 375 PSI (25.8 Bar) with 580 HP (433 kW) Caterpillar C15 ACERT diesel engine; 1150 CFM (32.6 m³/min) @ 375 PSI (25.8 Bar) with 700 HP (522 kW) Caterpillar C18 ACERT diesel engine; 1360 CFM (38.5 m³/min) @ 375 PSI (25.8 Bar) with 800 HP (597 kW) Caterpillar C27 ACERT diesel engine.

POWER UNIT:

Caterpillar C15 ACERT diesel engine, rated 540 HP (403 kW) @ 1800 rpm with 600 gal.(2,271 L) fuel capacity.

MAST:

Heavy duty structural steel mast with angular stress members and steel plated reinforcement at high stress areas, total length 40 ft. (12.2 m), raised and lowered by two6.5 in. (165 mm) diameter hydraulic cylinders equipped with safety counterbalance valves. Hydraulic powered mast lock pins are provided as standard equipment. Extended mast option available.

LEVELING JACKS:

The C-700-D utilizes three (3) leveling jacks, 2 rear 5 in. (127 mm) bore x 48 in. (1.2 m) stroke, 1 front 6.5 in. (169 mm) bore x 48 in. (1.2 m) stroke with built-in safety checks.

DRILL PIPE HANDLING:

The standard C-700-D is equipped with a 4 + 1 hydraulic indexing barrel loader to handle30 ft. (9.1 m) drill pipe, 5 in. (127 mm) to 7 in. (178 mm) diameter. Hydraulic breakout and power tong system are standard. Also included is a 2,200 lb. (998 kg) fixed-over-hole winch for pipe handling.

AIR FILTERS:

Individual heavy duty two stage dry type filters with a pre-cleaner for engine and compressor.

NIGHT LIGHTING:

A combination of Xenon HID and Halogen flood lights for viewing upper mast, table, power unit and deck are provided.

OPERATOR’S CAB:

Large isolated angled operator’s cab and control station allows operator to face drill table. Air conditioning, sound abatement, and cab pressurization are provided as standard.

MISCELLANEOUS ITEMS:

-Combined Safety, Parts, and Operations Manual.

-50 hour Maintenance Kit-includes hydraulic, compressor, and case drain filters.

-Cartridge style grease gun and safety kit are also provided.

APPROXIMATE WEIGHT & DIMENSIONS:

Weight: 120,000 lbs (54,432 kg)

Width: 12 ft. 6 in. (3.8 m)

Height (mast down): 14 ft. 1 in. (4.3 m)

Height (mast up): 46 ft. 6 in. (14.2 m)
Length (mast down): 50 ft.6 in.(15.5 m)

Length (mast up): 34 ft. (10.4 m)

OPTIONAL EQUIPMENT:

-Dual speed & torque rotary heads

-Compressor variable volume control

-130 °F (54° C) ambient cooler

-REICHdrill Angle Drill Package for 0° to 30° angle holes in 5° increments.

-9 gpm (34 L/min) water injection

-NVE dust control system

-Drill efficiency indicator

-Engine heater for cold weather starts

-Pipe thread greaser

-Centralized lubrication

-Wiggins “Quick-Fill” Service Center

-Full and partial walkways

-Export lift kit

-Special or two-tone Paint

-Additional Xenon HID and Halogen lighting

-Engine and compressor extended warranties

C-725-D

Recommended Hole Size: 7 in. - 9 7/8 in. (178 - 251 mm)
Drill Pipe Diameter & Length: 6in.-7 5/8in.(127-178mm) to 35 ft.(10.7 m)
Bit Loading Capacity: Up to 70,000 lbs. (31,752 kg)
Maximum Rated Pulldown: 60,000 lbs. (27,216 kg)
Approx. Single Pass Depth: 34 ft. 5 in. (10.5 m)
Maximum Depth: 174 ft. (53 m)
Rotation & Torque: 0 - 141 RPM @ 114,390 lb-in. (12,926 Nm)
Air Compressor & Engine:

STD: 1350 CFM @ 125 PSI @ 1800 RPM (38.2 m³/min @ 8.6 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT: 1500CFM @ 125 PSI @ 1800 RPM (42.5 m³/min @ 8.6 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT: 1700CFM @ 125 PSI @ 1800 RPM (48 m³/min @ 8.6 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT: 1070CFM @ 375 PSI @ 1800 RPM (30.3 m³/min @ 25.8 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT: 1150CFM @ 375 PSI @ 1800 RPM (32.6 m³/min @ 25.8 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT: 1360CFM @ 375 PSI @ 1800 RPM (38.5 m³/min @ 25.8 Bar) w/ 800 HP (597 kW) CAT C27 ACERT
OPT: 1600CFM @ 350 PSI @ 1800 RPM (45.3 m³/min @ 24.1 Bar) w/ 900 HP (671 kW) CAT C27 ACERT

Approx. Operating Weight: 140,000 lbs. (63,503 kg)

RATED CAPACITY:
Rated capacity is for 7 in. to 9.875 in. (178 mm to 251 mm) using rotary or down-the-hole hammer drilling for depths up to 174 ft. (53 m).

STANDARD MOUNTING:

Standard mounting for the C-725-D is a heavy-duty, excavator type undercarriage Series 330EL, 29.5 in. (750 mm) wide Triple Grouser Type with 3 point oscillating suspension and a two speed hydraulically driven tram.

PULLDOWN SYSTEM:

Up to 70,000 lb. (31,752 kg) bit loading capacity with a maximum of rated pulldown of 60,000 lb. (27,216 kg), 47,190 lb. (21,405 kg) hoist capacity. Maximum hoist rate 250fpm (76 m/pm). Maximum feed rate 90 fpm (27 m/pm). REGEN increases feed rate to 202 fpm (61 m/min). Chains: Two heavy duty roller chains 2.5 in. (63 mm) pitch. Stroke:40 ft. (12.2 m) for 35 ft. (10.7 m) drill pipe. 12 in. (305 mm) table opening.

ROTARY HEAD:

Dual motor, 0 to 141 rpm at 114,390 lbs-in (12,926 Nm) torque. (Based on 100% efficiency). Equipped with nylon guide shoes. Optional speeds and torques available.

AIR COMPRESSOR:

1350 CFM (38.2 m³/min) @ 125 PSI (8.6 Bar) with an Air Pressure Regulator is standard.Synthetic PAO, ISO 32 compressor oil is provided. Optional—1700 CFM (48 m³/min) @ 125 PSI (8.6 Bar) with 700 HP (522 kW) Caterpillar C18 ACERT diesel engine; 1070 CFM (30.3m³/min) @ 375 PSI (25.8 Bar) with 700 HP (522 kW) Caterpillar C18 ACERT diesel engine; 1150 CFM (32.6 m³/min) @ 375 PSI (25.8 Bar) with 700 HP (522 kW) Caterpillar C18 ACERT diesel engine; 1360 CFM (38.5 m³/min) @ 375 PSI (25.8 Bar) with 800 HP (597 kW) Caterpillar C27 ACERT diesel engine.

POWER UNIT:

Caterpillar C18 ACERT diesel engine, rated 700 HP (522 kW) @ 1800 rpm with 600 gal.(2,271 L) fuel capacity.

MAST:

Heavy duty structural steel mast with angular stress members and steel plated reinforcement at high stress areas, total length 47 ft. (14.3 m), raised and lowered bytwo 6.5 in. (165 mm) diameter hydraulic cylinders equipped with safety counterbalance valves. Hydraulic powered mast lock pins are provided as standard equipment.

LEVELING JACKS:

The C-725-D utilizes three (3) 6.5 in. (152 mm) bore x 48 in. (1.2 m) stroke, leveling jackswith built-in safety checks.

DRILL PIPE HANDLING:

The standard C-725-D is equipped with a 4 + 1 hydraulic indexing barrel loader to handle35 ft. (10.7 m) drill pipe, 6 in. (152 mm) to 7.625 in. (194 mm) diameter. Hydraulic breakout and power tong system are standard. Also included is a 8,500 lb. (3,855 kg) fixed-over-hole winch for pipe handling. Optional loader configurations available.

AIR FILTERS:

Individual heavy duty two stage dry type filters with a pre-cleaner for engine and compressor.

NIGHT LIGHTING:

A combination of Xenon HID and Halogen flood lights for viewing upper mast, table, power unit and deck are provided.

OPERATOR’S CAB:

Large isolated angled two man operator’s cab with electric over hydraulic control station allows operator to face drill table. Air conditioning, sound abatement, and cab pressurization are provided as standard.

MISCELLANEOUS ITEMS:

-Combined Safety, Parts, and Operations Manual.

-50 hour Maintenance Kit-includes hydraulic, compressor, and case drain filters.

-Cartridge style grease gun and safety kit are also provided.

APPROXIMATE WEIGHT & DIMENSIONS:

Weight: 140,000 lbs. (63,504 kg)

Width: Shipping 14 ft. (4.3 m)

Operating 17 ft. (5.2 m)

Height (mast down): 18 ft. 3 in. (5.6 m)

Height (mast up): 54 ft. (16.4 m)

Length (mast down): 55 ft.10 in. (17 m)

Length (mast up): 45 ft. 8 in. (13.9 m)

OPTIONAL EQUIPMENT:

-Dual speed & torque rotary heads

-Compressor variable volume control

-130 °F (54°C) ambient cooler
-REICHdrill Angle Drill Package for 0° to 20° angle holes in 5 increments.
-9 gpm (34 L/min) water injection°

-NVE dust control system

-Drill efficiency indicator

-Engine heater for cold weather starts

-Pipe thread greaser

-Centralized lubrication

-Wiggins “Quick-Fill” Service Center

-Full and partial walkways

-Export lift kit

-Special or two-tone Paint

-Additional Xenon HID and Halogen lighting

-Engine and compressor extended warranties

C-750-D

Recommended Hole Size: 7.88 in. - 12.25 in. (200 - 312 mm)
Drill Pipe Diameter & Length: 7 in. - 8 5/8 in. (178 - 219 mm) x 40ft.(12.2 m)
Bit Loading Capacity: 90,000 lbs. (40,824 kg)
Maximum Rated Pulldown: 80,000 lbs. (36,288 kg)
Approx. Single Pass Depth: 45 ft. (13.7 m)
Maximum Depth: 187 ft. (61 m)
Rotation & Torque: 0 - 141 RPM @ 128,690 lb-in. (14542 Nm)
Air Compressor & Engine:

STD: 1700 CFM @ 125 PSI @ 1800 RPM (48 m³/min @ 8.6 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT: 2000 CFM @ 125 PSI @ 1800 RPM (53 m³/min @ 8.6 Bar) w/ 800 HP (597 kW) CAT C27 ACERT
OPT: 2700 CFM @ 100 PSI @ 1800 RPM (56.7 m³/min @ 6.9 Bar) w/ 950 HP (708 kW) CAT C27 ACERT
OPT: 1360CFM @ 375 PSI @ 1800 RPM (38.5 m³/min @ 25.8 Bar) w/ 800 HP (597 kW) CAT C27 ACERT
OPT: 2 - 1360CFM @ 375 PSI @ 1800 RPM (38.5 m³/min @ 25.8 Bar) 2700CFM (76 m³/min) w/ 2 - 765 HP (571 kW) CAT C18 ACERT

Approx. Operating Weight: 180,000 lbs. (81648 kg)

RATED CAPACITY:

Rated capacity is for 7.88 in. to 12.25 in. (200 mm to 312 mm) using rotary or down-the-hole hammer drilling for depths up to 187 ft. (57 m).

STANDARD MOUNTING:

Standard mounting for the C-750-D is a heavy-duty, CAT^® Series 345SL, 29.5 in. (750 mm) wide Triple Grouser Type with 3 point oscillating suspension and a two speed hydraulically driven tram.

PULLDOWN SYSTEM:

Up to 90,000 lb. (40,824 kg) bit loading capacity with a maximum of rated pulldown of 80,000 lb. (36,288 kg), 49,550 lb. (22,475 kg) hoist capacity. Maximum hoist rate 161fpm (49 m/pm). Maximum feed rate 90 fpm (27 m/pm). REGEN increases feed rate to 202 fpm (61 m/min). Chains: Two heavy duty roller chains 2.5 in. (63 mm) pitch. Stroke:44 ft. (13.4 m) for 40 ft. (12.2 m) drill pipe. 13 in. (330 mm) table opening.

ROTARY HEAD:

Dual motor, 0 to 141 rpm at 128,690 lbs-in (14,542 Nm) torque. (Based on 100% efficiency). Equipped with nylon guide shoes. Optional speeds and torques available.

AIR COMPRESSOR:

1700 CFM (48 m³/min) @ 125 PSI (8.6 Bar) with an Air Pressure Regulator is standard.Synthetic PAO, ISO 32 compressor oil is provided. Optional—2700 CFM (56.7 m³/min) @ 100 PSI (6.9 Bar) with 950 HP (708 kW) Caterpillar C27 ACERT diesel engine; 2000 CFM (53m³/min) @ 125 PSI (8.6 Bar) with 800 HP (597 kW) Caterpillar C27 ACERT diesel engine; 1360 CFM (38.5 m³/min) @ 375 PSI (25.8 Bar) with 800 HP (597 kW) Caterpillar C27 ACERT diesel engine; 2—1360 CFM (38.5 m³/min) = 2700 CFM (76m³/min) @ 375 PSI (25.8 Bar) with 2—800 HP (597 kW) Caterpillar C27 ACERT diesel engines.

POWER UNIT:

Caterpillar C18 ACERT diesel engine, rated 700 HP (522 kW) @ 1800 rpm with 800 gal.(2,271 L) fuel capacity.

MAST:

Heavy duty structural steel mast with angular stress members and steel plated reinforcement at high stress areas, total length 50 ft. (15.2 m), raised and lowered by two7 in. (178 mm) diameter hydraulic cylinders equipped with safety counterbalance valves. Hydraulic powered mast lock pins are provided as standard equipment.

LEVELING JACKS:

The C-750-D utilizes three (3) leveling jacks, 7 in. (178 mm) bore x 48 in. (1.2 m) stroke,with built-in safety checks.

DRILL PIPE HANDLING:

The standard C-750-D is equipped with a 4 + 1 hydraulic indexing barrel loader to handle40 ft. (12.2 m) drill pipe, 7 in. (178 mm) to 8.625 in. (219 mm) diameter. Hydraulic breakout and power tong sytem are standard. Also included is a 8,500 lb. (3,855 kg) fixed-over-hole winch for pipe handling. Optional loader configurations available.

AIR FILTERS:

Individual heavy duty two stage dry type filters with a pre-cleaner for engine and compressor.

NIGHT LIGHTING:

Combination of shock mounted Xenon HID and Halogen flood lights for viewing upper mast, table, power unit and work deck.

OPERATOR’S CAB:

Large isolated angled two man operator’s cab and control station allows operator to face drill table. Air conditioning, sound abatement, and cab pressurization are provided asstandard.

MISCELLANEOUS ITEMS:

-Combined Safety, Parts, and Operations Manual.

-50 hour Maintenance Kit-includes hydraulic, compressor, and case drain filters.

-Cartridge style grease gun and safety kit are also provided.

APPROXIMATE WEIGHT &

DIMENSIONS:

Weight: 180,000 lbs. (81,648 kg)

Width: Shipping 14ft. (4.3 m)

Operating 22 ft. (6.7 m)

Height (mast down): 18 ft. 3in. (5.6 m)

Height (mast up): 59 ft. (18 m)

Length (mast down): 60ft.10in.(18.5 m)

Length (mast up): 45 ft. 8 in. (13.9 m)

OPTIONAL EQUIPMENT:

-Dual speed & torque rotary heads

-Compressor variable volume control

-130 F (54 C) ambient cooler

-REICHdrill Angle Drill Package for 0 to 20 angle holes in 5 increments.

-9 gpm (34 L/min) water injection

-NVE dust control system

-Drill efficiency indicator

-Engine heater for cold weather starts

-Pipe thread greaser

-Centralized lubrication

-Wiggins “Quick-Fill” Service Center

-Full and partial walkways

-Export lift kit

-Special or two-tone Paint

-Additional Xenon HID and Halogen lighting

-Engine and compressor extended warranties

T-650-DII

RATED CAPACITY:

Rated capacity is for 5 in. to 6.75 in. (127 mm to 172 mm) usingdown-the-hole hammer drilling for depths up to 200 ft. (61 m).

STANDARD MOUNTING:

Standard mounting for the T-650-DII is a heavy-duty, three axle truck with 20,000 lb. (9,072 kg) front, 46,000 lb. (20,865 kg) rear axles, and 405 HP (302 kW) diesel engine, and 10 speed transmission.

PULLDOWN SYSTEM:

Maximum of rated pulldown of 30,000 lb. (13,607 kg), 30,000 lb. (13,607 kg) hoist capacity. Maximum hoist rate 104 fpm (32 m/pm). Maximum feed rate 148 fpm (45m/pm). REGEN engaged increases feed rate to 174 fpm (53 m/min). Chains: Two heavy duty roller chains 1.75 in. (44 mm) pitch. Stroke: 28 ft. (8.5 m) for 25 ft. (7.6 m) drill pipe. 10 in. (254 mm) table opening.

ROTARY HEAD:

0 to 108 rpm at 57,200 lbs-in (6,463 Nm) torque. (Based on 100% efficiency). Equipped with nylon guide shoes. Optional speeds and torques available.

AIR COMPRESSOR:

900 CFM (25.5 m³/min) @ 350 PSI (24 Bar) with an Air Pressure Regulator is standard.Synthetic PAO, ISO 32 compressor oil is provided. Optional—1000 CFM (28.3 m³/min) @ 350 PSI (24.1 Bar) with 540 HP (403 kW) Caterpillar C15 ACERT diesel engine; 1070 CFM (30.3m³/min) @ 375 PSI (25.8 Bar) with 580 HP (433 kW) Caterpillar C15 ACERT diesel engine.

POWER UNIT:

Caterpillar C15 ACERT diesel engine, rated 540 HP (403 kW) @ 1800 rpm with 175 gal.(662 L) fuel capacity.

MAST:

Heavy duty structural steel mast with angular stress members and steel plated reinforcement at high stress areas, total length 34 ft. (10.4 m), raised and lowered by two5.5 in. (140 mm) diameter hydraulic cylinders equipped with safety counterbalance valves.Hydraulic powered mast lock pins are provided as standard.

LEVELING JACKS:

The T-650-DII utilizes three (3) leveling jacks, all 48 in. (1.2 m) stroke, with built-in safety checks. All jacks are 5 in. (127 mm) diameter bore.

DRILL PIPE HANDLING:

The standard T-650-DII is equipped with a 4 + 1 pod hydraulic indexing barrel loader to handle 25 ft. (7.6 m) drill pipe, 4 in. (102 mm) to 5.5 in. (140 mm) diameter. Hydraulicbreakout and power tong system are standard. Also included is a 2,200 lb. (998 kg) fixed-over-hole winch for pipe handling.

AIR FILTERS:

Individual heavy duty two stage dry type filters with a pre-cleaner for engine and compressor.

NIGHT LIGHTING:

Five (5) shock mounted halogen flood lights for viewing upper mast, table, power unit and deck.

OPERATOR’S CAB:

Isolated operator’s cab and control station. Air conditioning, sound abatement, and cab pressurization are provided as standard.

MISCELLANEOUS ITEMS:

-Combined Safety, Parts, and Operations Manual.

-50 hour Maintenance Kit-includes hydraulic, compressor, and case drain filters.

-Cartridge style grease gun and safety kit are also provided.

APPROXIMATE WEIGHT &

DIMENSIONS:

Weight: 55,000 lbs. (24,948 kg)

Width: 8 ft. (2.4 m)

Height (mast down): 13 ft. 8 in. (4.2 m)

Height (mast up): 38 ft. 8 in. (11.8 m)

Length (mast down): 39 ft.8 in.(12.1 m)

Length (mast up): 39 ft. 8 in. (12.1 m)

OPTIONAL EQUIPMENT:

-Dual speed and torque rotary heads

-Compressor variable volume control

-130^oF (54^oC) ambient cooler

-REICHdrill Angle Drill Package for 0° to 30° angle holes in 5° increments.

-9 gpm (34 L/min) water injection

-NVE dust control system

-Drill efficiency indicator

-Engine heater for cold weather starts

-Pipe thread greaser

-Centralized lubrication

-Export packaging

-Special or two-tone Paint

-Additional Halogen lighting

-Engine and compressor extended warranties

T-750-D

Recommended Hole Size: 8 3/4 in. - 12 1/4 in. (222 - 312 mm)
Drill Pipe Diameter & Length: 7 5/8 in. - 10 3/4 in. (194 - 273 mm) x 30 ft.(9.1 m)
Bit Loading Capacity: Up to 70,000 lbs. (31,751 kg)
Maximum Rated Pulldown: 60,000 lbs. (27,216 kg)
Approx. Single Pass Depth: 30 ft. (9.1 m)
Maximum Depth: 120 ft. (37 m)
Rotation & Torque: 0 - 141 RPM @ 114,390 lb-in. (12,924 Nm)
Air Compressor & Engine:

STD: 1350 CFM @ 125 PSI @ 1800 RPM (38.2 m³/min @ 8.6 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT: 1500 CFM @ 125 PSI @ 1800 RPM (42.5 m³/min @ 8.6 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT:1700 CFM @ 125 PSI @ 1800 RPM (48.1 m³/min @ 8.6 Bar) w/ 800 HP (597 kW) CAT C27 ACERT
OPT: 1070CFM @ 375 PSI @ 1800 RPM (30.3 m³/min @ 25.8 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT: 1150CFM @ 375 PSI @ 1800 RPM (32.6 m³/min @ 25.8 Bar) w/ 700 HP (522 kW) CAT C18 ACERT
OPT: 1360CFM @ 375 PSI @ 1800 RPM (38.5 m³/min @ 25.8 Bar) w/ 800 HP (597 kW) CAT C27 ACERT

Approx. Operating Weight: 100,000 lbs. (45,359 kg)

RATED CAPACITY:

Rated capacity is for 8 3/4 in. to 12 1/4 in. (222 to 312 mm) using rotary or down-the-hole hammer drilling for depths up to 120 ft. (37 m).

STANDARD MOUNTING:

Standard mounting for the T-750-D is a heavy-duty, 8 x 4 carrier type chassis with 40,000 lb. (18,144 kg) front and 70,000 lb. (31,751 kg) rear suspension.

PULLDOWN SYSTEM:

Up to 70,000 lb. (31,751 kg) bit loading capacity with a maximum of rated pulldown of 60,000 lb. (27,216 kg), 25,000 lb. (11,340 kg) hoist capacity. Maximum hoist rate 224fpm (68.2 m/pm). Maximum feed rate 200 fpm (61 m/pm). with REGEN engaged. Chains: Two heavy duty roller chains 2.5 in. (63 mm) pitch. Stroke: 34 ft. (10.4 m) for 30 ft. (9.1 m) drill pipe. 13 in. (330 mm) table opening.

ROTARY HEAD:

Dual motor 0 to 141 rpm at 114,390 lbs-in (12,924 Nm) torque. (Based on 100% efficiency). Equipped with nylon guide shoes.

AIR COMPRESSOR:

1350 CFM (38.2 m³/min) @ 125 PSI (8.6 Bar) with an Air Pressure Regulator is standard.Synthetic PAO, ISO 32 compressor oil is provided. 520 gal. (1,968 L) fuel capacity.

MAST:

Heavy duty structural steel mast with angular stress members and steel plated reinforcement at high stress areas, total length 41 ft. (12.5 m), raised and lowered by two6 in. (152 mm) diameter hydraulic cylinders equipped with safety counterbalance valves. Hydraulic powered mast lock pins are provided as standard equipment.

LEVELING JACKS:

The T-750-D utilizes three (3) leveling jacks, 6 in. (152 mm) bore x 48 in. (1.2 m) stroke,with built-in safety checks.

DRILL PIPE HANDLING:

The standard T-750-D is equipped with a 3 + 1 hydraulic indexing barrel loader to handle30 ft. (9.1 m) drill pipe, 7 5/8 in. (194 mm) to 10 3/4 in. (273 mm) diameter. Hydraulic breakout and power tong sytem are standard. Also included is a 8,500 lb. (3,855 kg) fixed-over-hole winch for pipe handling.

AIR FILTERS:

Individual heavy duty two stage dry type filters with a pre-cleaner for engine and compressor.

NIGHT LIGHTING:

Combination of shock mounted Xenon HID and Halogen flood lights for viewing upper mast, table, power unit, and work deck.

OPERATOR’S CAB:

A large isolated operator's cab and ergonomically designed control station is provided. Air conditioning, sound abatement, and cab pressurization are provided as standard.

MISCELLANEOUS ITEMS:

Combined Safety, Parts, and Operations Manual.

50 hour Maintenance Kit-includes hydraulic, compressor, and case drain filters.

Cartridge style grease gun and safety kit are also provided.

APPROXIMATE WEIGHT & DIMENSIONS:

Weight: 100,000 lbs. (45,359 kg)

Width: 12 ft. (3.66 m)

Height (mast down): 14 ft. 5 in. (4.39 m)

Length (mast down): 45 ft. 4in.(13.8 m)

OPTIONAL EQUIPMENT:

-Dual speed & torque rotary head

-Compressor variable volume control

-130 F (54 C) ambient cooler

-REICHdrill Angle Drill Package for 0 to 20 degree angle holes in 5 degree increments.

-9 gpm (34 L/min) water injection

-NVE dust control system

-Drill efficiency indicator

-Engine heater for cold weather starts

-Drill pipe thread greaser

-Centralized lubrication

-Wiggins “Quick-Fill” Service Center

-Full and partial walkways

-Export lift kit

-Special or two-tone Paint

-Additional Xenon HID and Halogen lighting

-Engine and compressor extended warranties